Hey all, Edit: M2P, latest firmware and DJI Go 4 versions Resurrecting this thread, because either I'm doing something wrong or EXP has changed. Here's the issue: The above info (and other sources) say these EXP settings should default to 0.40, 0.40, 0.40. But when I go to the EXP settings, I get the defaults of 0.25, 0.20, 0.25.
The DJI GO 4 is an app that is well known in this space and in this post we would take a look at 5 common causes of video lag with the Phantom 4 and possible solutions you could explore, using this app. ZULMAHDI / Pixabay. Contents hide. 1 1) Device Compatibility Issues. 2 2) Device and Software Update Issues.
DJI GO App Downloading DJI GO Search for ‘DJI GO’ on the App Store or Google Play and download the app to your mobile device. DJI GO supports iOS 8.0 (or later) or Android 4.1.2 (or later). Connecting to DJI GO 1. Turn on the aircraft and the remote controller. 2. Connect your mobile device to the remote controller using a USB cable. 3.
i have the same problem with my dji phantom 4. Got it 1 week ago and it has the latest firmware and software (DJI GO app and pix4dcapture) whenever i set the kamera in manual with say: Shutter - 1200, Aperture 5 and ISO100 and then start the pix4dcapture the settings Stay until the Camera ready checklist is green.
Calibrate the gimbal via DJI Fly. 1) Power on the aircraft and remote controller, and launch DJI Fly. 2) Enter the camera view, tap “” at the upper right corner to enter “System Settings”. Select “Control” and tap “Gimbal Calibration” and “Auto”. 2. Calibrate the gimbal via DJI GO 4. 1) Power on the aircraft and remote
DJI GO 4 Manual Contents: Introduction and Camera View. DJI GO 4 General Settings. Main Controller Settings. Visual Navigation Settings. Remote Controller Settings. Image Transmission, Battery, Wifi & Virtual Joystick Settings. Camera Settings. Intelligent Flight Modes. Miscellaneous
. 279 53 172 135 39 282 32 235 166
dji go 4 camera settings
